Global 3D Printed Medical Implants Market

The 3D printed medical prosthetics market consist of sales of 3D printed medical prosthetics devices and related services. 3D printing technology is used to create an artificial three dimensions’ physical object with the help of computer-aided design, and these prosthetics are intended to help patients with missing or defective body parts to restore normal functions. The global 3D printed prosthetics market is expected grow from $0.06 billion in 2020 to $0.07 billion in 2021 at a compound annual growth rate (CAGR) of 16.7%. The growth is mainly due to the companies resuming their operations and adapting to the new normal while recovering from the COVID-19 impact, which had earlier led to restrictive containment measures involving social distancing, remote working, and the closure of commercial activities that resulted in operational challenges. The market is expected to reach $0.12 billion in 2025 at a CAGR of 14%. The 3D printed medical prosthetics market covered in this report is segmented by material into polypropylene, polyethylene, acrylics, polyurethane. The rising number of accidental injuries is driving the growth of the 3D printing prosthetic devices market. Accidental injuries can cause serious damage to a person, and these injuries can sometimes lead to amputation. In 2019, car crashes in the US resulted in the death of 38,800 people. According to a report from National Centre for Health Statistics, approximately 50,000 new amputation cases come up each year in the US. Increase in incidences of other medical conditions such as diabetes and vascular diseases is also leading to a rise in amputation cases, thus boosting the sales of 3D printing prosthetics. For instance, according to a report published in the American Journal of Managed Care, it was estimated that, globally, one patient leg is amputated in every 30 seconds and around 85% of these amputations were result of a diabetic foot ulcer. The delay in elective procedures attributing to the coronavirus outbreak is to act as a major factor to limit the growth of the 3D printed medical prosthetics market. Many countries and hospitals have diverted their healthcare resources to deal with COVID-19 patients. For instance, according to the Centers for Medicare & Medicaid Services (CMS) safety guidelines released in March 2020, all the elective and non-essential surgical, dental, and medical procedures are delayed in the USA during 2019 Novel Coronavirus (COVID-19) outbreak. Hence, the delays in surgical or elective procedures are projected to decline the demand for 3D printed medical prosthetics market in the near future. Companies in the 3D printing prosthetics market are focusing on development of waterproof prosthetic devices. The aim behind this innovation is to provide the user with an increased range of mobility, especially in athletics. In October 2020, Braskem, Americas leading producer of biopolymers has launched Braskem e-NABLE Chapter for Philanthropic Creation of 3D Printed Prosthetic Devices. Braskem was selected to be certified to produce the e-NABLE Phoenix V3 prosthetic hand as it is one of the most commonly produced e-NABLE prosthetic devices. The major players covered in the global 3d printed prosthetics market are 3D Systems corporation, EnvisionTEC, Stratasys Ltd., Bionicohand, YouBionic, UNYQ, Mecuris, LimbForge, Inc., Open Bionics, Protosthetics, Create Prosthetics, Bio3D Technologies, Laser GmbH, Prodways Group, 3T RPD Ltd., Photopolymerization, laser beam melting, Formlabs, Concept Laser, EOS GmbH Electro Optical Systems, Renishaw Plc, Groupe Gorge SA, Biomedical Modelling, Carbon Inc., Ottobock, Freedom innovation. The countries covered in the global 3D printed prosthetics market are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, USA. The regions covered in the global 3D printed prosthetics market are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, Africa. The global 3D printed prosthetics market is segmented - 1) By Material: Polypropylene, Polyethylene, Acrylics, Polyurethane 2) By Type: Sockets, Limbs, Joints, Covers, Others 3) By End-User: Hospitals, Rehabilitation Centers, Prosthetic Clinics

The 3D printed medical devices market consist of sales of 3D printed medical devices and related services. 3D printing is a process to create three dimensional medical devices with the help of computer-aided design. Some of the 3D printed medical devices include orthopaedic and cranial implants, surgical instruments, dental restorations such as crowns, and external prosthetics. The 3D printed medical devices market covered in this report is segmented by type into implants, surgical instruments, prosthetics, tissue engineering devices, others. The 3D printed medical devices market is also segmented by application into orthopedic, spinal, dental, hearing aids, other; by technology into fused deposition modelling, digital light processing, stereolithography, selective laser melting; by raw material into plastics, biomaterial inks, metals and alloys; by end user into hospitals, diagnostics centres, academic institutions, others. The global 3D printed medical devices market is expected to grow from $1.33 billion in 2020 to $1.49 billion in 2021 at a compound annual growth rate (CAGR) of 12%. The growth is mainly due to the companies resuming their operations and adapting to the new normal while recovering from the COVID-19 impact, which had earlier led to restrictive containment measures involving social distancing, remote working, and the closure of commercial activities that resulted in operational challenges. The 3D printed medical devices market is expected to reach $2.78 billion in 2025 at a CAGR of 16.9%. Increasing prevalence of osteoarthritis and similar musculoskeletal conditions is one of the major factors driving the growth of the 3D printed medical devices market. Osteoarthritis is a disorder that damages the joint cartilage and surrounding tissues causing pain, stiffness, and loss of joint function to the person affected by it. The 3D printing medical devices enable to create an exact replica of a patient's joint which can provide surgeons with a crucial piece of information which might not be visible on a 2-dimensional scan. The chance of developing the osteoarthritis increases with age. For instance, according to the US National Library of Medicine report, by 2040, it is estimated that approximately 78 million (26%) US adults aged 18 years and above will be projected to have doctor-diagnosed arthritis. Thereby driving the adoption of 3D printed medical devices, positively impacting the market growth. Biocompatibility issues related to 3D printed medical devices restrict the growth of the 3D printed medical devices market. Biocompatibility implies to the properties that make material or a device compatible with the human body. If the material used for the preparation of 3D printed implant device is not compatible with the patients' biomechanics, then patients may suffer side effects such as abnormal growth of bone and bleeding. Among the most common metal used in the manufacturing of 3D printed medical devices is Titanium. Though Titanium offers reliability and accuracy in creating medical grade products, some human bodies tend to reject titanium as its chemical composition can inhibit the bone and tissue from interacting with the implant. Apart from these other reasons which may contribute to the failure of metallic implants that are either caused by the material properties of the metal (e.g., high stiffness, high corrosion rate, and toxicity) itself or by the exposure of the bone to infected metal implants i.e., infection. The increasing use of 3D printing technology in the spine industry is one of the latest trends in the 3D printing medical devices market. The spine industry is adopting 3D printing to produce new innovative products that can promote bone ingrowth and improve implant fixation to spine bone, reduce the number of manufacturing steps, thereby making the 3D printing process more cost-effective in several cases. For instance, Medtronic launched its titanium 3D printed platform – TiONIC Technology. TiONIC Technology is a 3D printed technique that uses laser methods to create implants with enhanced surface textures. Artic-L is the first implant created by the company using TiONIC Technology. The implant is made up of titanium and designed to be used by surgeons in spine surgery. Addition to that, K2M’s Lamellar, introduced its 3D Titanium Technology to create 3D spinal implant. The 3D printing medical device using titanium technology uses an advanced 3D printing method to create structures that were once considered impractical with traditional manufacturing techniques. The implants use titanium powder and are associated with bone growth activity. Food and Drug Administration (FDA) has Centre for Device and Radiological Health (CDRH) to regulate the firm which manufacture, repackage, relabel and/or import 3D printing medical devices in the US. FDA provides manufacturers with a draft with guidance that includes recommendations for device design, manufacturing, and testing considerations during the development of 3D printing medical devices. The section F of 'Technical Considerations for Additive Manufactured Medical Device' draft, requires the manufacturers to evaluate the biocompatibility of the final finished device as described in the guidance "Use of International Standard ISO-10993". The guidelines also require the manufacturer of the 3D printing devices to mention the additional information in the label if any toxic chemical additives such as certain additives, catalysts, binding and curing agents, uncured monomers and plasticizers are used in making 3D printing medical devices. In July 2020, Medtronic, an American Irish-domiciled medical device company acquired Medicrea International for an undisclosed amount. The acquisition of Medicrea expands Medtronic’s already deep portfolio as this adds to their spinal solution profile as the advent of new digital technology will offer the ability to custom spinal implants. Medicrea International, a spinal surgery company with 30+ FDA approved spinal implant technologies that have been utilized in over 150,000 spinal surgeries to date. Major players in the 3D printed medical devices market are 3D Systems Corporation, EnvisionTEC, Stratasys Ltd., Arcam AB and Cyfuse Biomedical. The regions covered in the 3D printed medical devices market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East and Africa. The countries covered in the 3D printed medical devices market report are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, USA. The global 3D printed medical devices market is segmented - 1) By Type: Implants, Surgical Instruments, Prosthetics, Tissue Engineering Devices, Others 2) By Application: Orthopedic, Spinal, Dental, Hearing Aids, Other 3) By Technology: Fused Deposition Modelling, Digital Light Processing, Stereolithography, Selective Laser Melting 4) By Raw Material: Plastics, Biomaterial Inks, Metals And Alloys 5) By End User: Hospitals, Diagnostics Centres, Academic Institutions, Others

The printer market consists of sales of printers by entities (organizations, sole traders, and partnerships) that provide printers, which are output devices that can be connected to computers to print paper documents. This includes text documents, images, or a combination of both. Only goods and services traded between entities or sold to end consumers are included. The global printer market is expected to grow from $132.41 billion in 2020 to $144.62 billion in 2021 at a compound annual growth rate (CAGR) of 9.2%. The growth is mainly due to the companies rearranging their operations and recovering from the COVID-19 impact, which had earlier led to restrictive containment measures involving social distancing, remote working, and the closure of commercial activities that resulted in operational challenges. The market is expected to reach $171.82 billion in 2025 at a CAGR of 4.4%. The printer market covered in this report is segmented by type into dot-matrix printers; line printers; daisy-wheel printers; laser and led printers; mono printers. The rising demand for 3D printers is anticipated to propel the growth of the printer market over the forecast period. 3D printers use a technique called additive processing to shape (or print) physical objects layer by layer before the design is finished. Companies across industries, from automotive to consumer products, are becoming aware of the benefits of 3D printers provide for production. Around 51% of businesses are currently using 3D printing for manufacturing, according to Sculpteo 's 2019 State of 3D Printing study. For instance, large car manufacturers such as Volkswagen, BMW, and Ford are already developing 3D-printed parts for their automobiles. In 2018, BMW stated that its one-millionth 3D-printed component had been installed for its BMW i8 Roadster. Therefore, the rising demand for 3D printers drives the growth of the printer market. High operating costs of the printer is a key factor that hinders the growth of the printer market. The most affordable type of printer is inkjet printers, but they are expensive to operate. These low-cost printers use ink cartridges, one black, and one colour cartridge to work, and it can cost $40 to $60 to purchase brand name substitutes for both. If users print a lot, they will have to replace them regularly and the complete set of replacement colour ink cartridges may exceed the original price of an inkjet printer in some cases. Therefore, the high operating costs of printers will restrict the printer market growth in the coming years. Advancing technologies are gaining popularity in the printer market. Major companies operating in the printing industry are focusing on developing advanced technology solutions for printers. For instance, in July 2019 HP Inc, a USA-based hardware company launched HP Neverstop Laser printer that is designed for companies in India to recreate smart printing technology. The HP Neverstop Laser Printer is an all-new, fast-reload laser printer that allows small and medium enterprises to save critical business time and costs, thereby expanding their efficiency. The printers have a mobile scanner, Wi-Fi Direct, and HP Smart App printing options and can substitute a toner in 15 seconds. In September 2019, IPValue Management, Inc, a USA-based company that provides intellectual property advisory services announced that its affiliate 138 East LCD Advancements Ltd. has acquired over 300 patents from Seiko Epson Corporation. This acquisition increases 138 East’s portfolios to over 2,500 worldwide patents. Seiko Epson Corporation is a Japan-based electronics company that manufactures computer printers, and information and imaging related equipment. The major players covered in the global printer market are Brother Industries Ltd, Seiko Epson Corp, Hewlett-Packard Company (HP), Canon, Ricoh, Samsung Electronics Co. Ltd, Konica Minolta Inc., Hitachi, Zebra Technologies, Lexmark International Inc., Printek LLC, Durst, Bixolon Co. Ltd, Fujitsu, Honeywell International Inc, Polaroid Corporation, Inca Digital Printers, Toshiba Tec Corporation, Kyocera Corp., Sharp Corp., Agfa and Gevaert, Eastman Kodak Company. The countries covered in the global printer market are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, USA. The regions covered in the global printer market are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, Africa. The global printer market is segmented - 1) By Type: Dot-Matrix Printers, Line Printers, Daisy-Wheel Printers, Laser & Led Printers, Mono Printers 2) By Technology: Inkjet, Thermal, Impact 3) By Printer Interface: Wired, Wireless 4) By Output Type: Color, Monochrome 5) By End-user Applications: Residential, Commercial, Educational Institutions, Enterprises, Government, Others

The 3D printing building construction market consists of the sales revenue earned by entities (organizations, sole traders, and partnerships) that construct buildings through 3D printers and offer related services. 3D printing or additive manufacturing is a computer-controlled sequential layering of materials to create three-dimensional shapes. In the construction industry, 3D printing is used to build components of building or to create a whole building. It helps to construct faster and more accurate structures with reduced labor costs and less wastage. The global 3D printing building construction market is expected to grow from $3.8 million in 2020 to $4.63 million in 2021 at a compound annual growth rate (CAGR) of 21.7%. The growth is mainly due to the companies resuming their operations and adapting to the new normal while recovering from the COVID-19 impact, which had earlier led to restrictive containment measures involving social distancing, remote working, and the closure of commercial activities that resulted in operational challenges. The market is expected to reach $329.01 million in 2025 at a CAGR of 190%. The 3D printing building construction market covered in this report is segmented by construction into modular; full building. The capability to build complex structures within a stipulated time for a reasonable cost is a major factor driving the demand for 3D printing building construction market. 3D printing building construction is cost-effective, saves time, provides more precision, safe, cuts labour costs, is environmentally friendly, and easily helps build complex building structures. According to 3D Natives Magazine published in January 2018, 3D printing in construction is economical in terms of material usage when compared with the traditional manufacturing process. Moreover, 3D printing reduces the labour costs by 50%-80%, production time by 50%-70%, and construction waste by 30%-60%. Therefore, the economic benefits offered by 3D printing construction is expected to significantly boost the market growth. A high initial capital investment requirement is anticipated to impact the growth of the 3D printing building construction market over the coming years. The high cost of 3D printers and their maintenance is a major challenge for industry players. According to Winsun 3D Builders, a 3D printing construction company, the high initial investment of 3D concrete printers is currently at a level that requires high capital and decent construction projects in order to support small and medium companies to overcome the capital requirements for expansion and growth. The requirement of high initial capital to set up the process is expected to hinder the growth of the 3D printing building construction market in the forecast period. Increasing flexibility in 3D printing operations using advanced software is a major trend shaping the growth of the 3D printing building construction market. In November 2019, AMFG, a UK-based provider of MES software, announced the strategic partnership with EOS to enable machine connectivity and end-to-end workflow automation for additive manufacturing. The companies together plan to offer customers the management of their entire additive manufacturing operations with AFMG’s Manufacturing Execution System (MES) and direct connectivity to machines with the software platform. EOS is a technology supplier in the field of industrial 3D printing of polymers and metals. In January 2019, Apis Cor, a company engaged in 3D printing in construction, announced a strategic collaboration with Gerdau, supplier of long and special steel worldwide. The collaboration is aimed at accelerating Apis Cor’s ability of 3D printing in the construction industry in the USA and South America. Gerdau previously supported Apis Cor in the “3D printing habitat challenge” organized by NASA. Gerdau was founded in 1901 and is a long steel producer based in Brazil. The major players covered in the global 3D printing building construction market are XtreeE, Winsun (Yingchuang Building Technique), Skanska, Apis Cor, Al build, Branch Technology, Zhuoda Group, Cazza Construction Company, Contour Crafting Corporation, Monolite UK, Sika, Cybe Construction, Mx3D, Centro Sviluppo Progetti, Icon, Imprimere Ag, BatiPrint, Be More 3D, WASP, CSP s.r.l. (Italy), Monolite UK (UK), Imprimere Ag, Al build, Branch Technology, Zhuoda Group, Cazza Costruction Company, COBOD International A/S, SQ4D. The countries covered in the global 3D printing building construction market are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, USA. The regions covered in the global 3D printing building construction market are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, Africa. The global 3D printing building construction market is segmented - 1) By Construction: Modular, Full Building 2) By Process: Extrusion, Powder Bonding, Others 3) By Printing Material: Concrete, Plastic, Metal, Hybrid, Others 4) By End User: Residential, Commercial, Industrial

The printing and related support activities market consists of sales of printing and related support activities by entities (organizations, sole traders and partnerships) that print products, such as newspapers, books, labels, business cards, stationery, business forms, and other materials, and perform support activities, such as data imaging, platemaking services, and bookbinding.The printing and related support activities market is segmented into printing and support activities for printing. The global printing and related support activities market is expected to grow from $298.6 billion in 2020 to $328.6 billion in 2021 at a compound annual growth rate (CAGR) of 9.%.The growth is mainly due to the companies rearranging their operations and recovering from the COVID-19 impact, which had earlier led to restrictive containment measures involving social distancing, remote working, and the closure of commercial activities that resulted in operational challenges.The market is expected to reach $362.2 billion in 2025 at a CAGR of 2%. Asia Pacific was the largest region in the global printing and related support activities market, accounting for 34% of the market in 2020.North America was the second largest region, accounting for 29% of the global market.South America was the smallest region in the global printing and related support activities market. Introduction of metal 3D and LED-UV printing is developing rapidly in offline post-press and finishing services market.These save energy, has shorter lead times, are environmentally friendly, provides consistent quality and have longer life.These technologies permit the immediate post-press of print products and impresses with a variety of colors, even on uncoated stock.For instance, companies such as Materialise NV, a 3D printing service provider and software developer are heavily investing in metal 3D printing technologies. Major companies in the market include Canon; Hewlett-Packard; Kyocera; Panasonic; Xerox. The countries covered in the global printing and related support activities market are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, USA. The regions covered in the global printing and related support activities market are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, Africa. The global printing and related support activities market is segmented - 1) By Type: Printing, Support Activities For Printing 2) By Technology: Flexography Printing, Rotogravure Printing, Digital Printing, OffSet Printing, Others Subsegments Covered: Commercial Printing (except Screen And Books), Commercial Screen Printing, Books Printing

3D Printing Building Construction Market Definition

The 3D printing building construction market consists of the sales revenue earned by entities (organizations, sole traders, and partnerships) that construct buildings through 3D printers and offer related services. Establishments that use 3D printing to create construction components and print entire buildings are included in this market. The 3D printing building construction market includes new work, additions, alterations, maintenance, and repairs.

The printing inks market consists of sales of printing inks by entities (organizations, sole traders or partnerships) that manufacture printing and inkjet inks. Printing inks are liquids that contain pigments or dyes, which are used to produce images, text and designs. They are widely used in letterpress and lithographic printing. Printing inks consist of a pigment or pigments of the required color mixed with oil or varnish. For example, a black ink made from carbon blacks is mixed with thick linseed oil or a similar oil, often with rosin oil to which rosin varnish is added. Inkjet inks consist of a base carrier such as water, oil or a solvent, and colorants such as dyes or pigments and small amounts of chemical additives to provide some unique characteristics. There are two types of inkjet inks – dye-based inks and pigment-based inks. The printing inks market is segmented into oil-based printing inks; solvent-based printing inks and water-based printing inks. The global printing inks market is expected to grow from $35.58 billion in 2020 to $37.01 billion in 2021 at a compound annual growth rate (CAGR) of 4%. The growth is mainly due to the companies rearranging their operations and recovering from the COVID-19 impact, which had earlier led to restrictive containment measures involving social distancing, remote working, and the closure of commercial activities that resulted in operational challenges. The market is expected to reach $42.21 billion in 2025 at a CAGR of 3%. Western Europe was the largest region in the global printing inks market, accounting for 30% of the market in 2020. Asia Pacific was the second largest region accounting for 25% of the global market. Africa was the smallest region in the global printing inks market. 3D technology will be a driver of the printing inks market during the forecast period. With a rise in worldwide interest in 3D printing technology from consumers, researchers, and industrial production, there is expected to be a high demand for 3D printing inks. Unlike 2D inks which are intended for the fabrication of planar surfaces, 3D inks are intended for the fabrication of volumetric constructs and devices. In April 2018, researchers at Dartmouth College developed a smart ink that turns 3D-printed structures into objects that can change shape and color. The ink aims to add even more functionality to 3D printing. Similarly, in June 2018, scientists at the Georgia Institute of Technology, Atlanta, developed a novel ink, which, when combined with a new method of printing and with varying lighting, hardens with the 3D printing object. A shortage of raw materials, resulting in their increasing market prices, is expected to negatively affect the printing inks market. Printing ink companies globally are suffering from a shortage of raw materials, including resins, monomers, photo initiators, oligomers, and additives. This is mainly due to raw material plant closures in China, a major source of these raw materials, as the country has placed significant emphasis on improving its environment by cutting industrial pollution. China is dominant in printing inks raw materials supplies due to the presence of strong refinery capacity and associated chemicals manufacturing ecosystem. Market players have already started facing challenges due to shortages of raw materials. For instance, in May 2018, Sun Chemical, a global printing ink manufacturer, faced disruptions in its printing inks supply due to global raw material shortage resulting from ongoing environmental regulatory compliance inspections in Chinese raw material plants and factories. Again, in July 2018, printing ink manufacturer Hubergroup announced an increase in prices for all energy curing inks and varnishes across Europe and the Americas with immediate effect due to shortages of raw materials. The printing inks market witnessed consolidation with a significant number of mergers and acquisitions. Top companies in the printing inks market are strategically acquiring and merging with start-ups and mid-sized companies to broaden their products and services range or to enter emerging regions. For instance, in 2017 and 2018, Siegwerk Group acquired Agfa’s UV inkjet ink division as well as Tupahue Tintas, a Brazilian flexo and gravure ink manufacturer, and Van Son Liquids B.V., a Netherlands-based producer of water-based flexo and gravure printing inks. The countries covered in the global printing inks market are Argentina, Australia, Austria, Belgium, Brazil, Canada, Chile, China, Colombia, Czech Republic, Denmark, Egypt, Finland, France, Germany, Hong Kong, India, Indonesia, Ireland, Israel, Italy, Japan, Malaysia, Mexico, Netherlands, New Zealand, Nigeria, Norway, Peru, Philippines, Poland, Portugal, Romania, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Sweden, Switzerland, Thailand, Turkey, UAE, UK, USA, Venezuela, Vietnam. The regions covered in the global printing inks market are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, Africa. The major players covered in the global printing inks market are DIC Corporation, Flint Group, Toyo Ink S.C. Holdings, Sakata Inx, Siegwerk Druckfarben. The global printing inks market is segmented - 1) By Type: Oil-Based Printing Inks, Solvent-Based Printing Inks, Water-Based Printing Inks 2) By Product Type: Offset Printing Inks, Flexographic Printing Inks, Rotogravure Printing Inks, Digital Printing Inks 3) By End-Use Industries: Packaging, Print Media, Commercial Printing, Others