The construction composites market consists of sales of the construction composites by entities (organizations, sole traders, and partnerships) that are used in the construction of entire bridge structures, bridge decks, and bridge enclosures. The composite construction is aimed at providing the maximum strength and stiffness to the structure with the minimum investment of the resources that are made available. They are advantageous due to their high stiffness-to-weight and strength-to-weight ratios when compared to standard materials such as steel and reinforced concrete. The compression resistance of concrete and the tension resistance of steel in the structure are combined in the composite construction. The main types of resins in construction composites are polyester resin, vinyl ester, polyethylene, polypropylene, and epoxy resin. Polyesters are the frequently used thermoset resin for all commercial composites. These resins provide stability of good mechanical, chemical, electrical properties, dimensional stability, ease of handling, and low cost. The different types of fibers include carbon fibers, glass fibers, and natural fibers that are used by various end-use sectors such as industrial, commercial, housing, and civil. The global construction composites market is expected to grow from $5.71 billion in 2021 to $6.31 billion in 2022 at a compound annual growth rate (CAGR) of 10.7%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, affecting many markets across the globe. The market is expected to grow to $8.09 billion in 2026 at a compound annual growth rate (CAGR) of 6.4%. The increasing construction activities are significantly driving the growth of the construction composites market. Construction is the process of putting together materials to create enormous structures. Composite materials are employed in construction because of the numerous advantages they provide over traditional building materials. The increasing construction activities for residential and non-residential buildings are promoting the demand for construction composites and thereby promoting the market growth. For instance, according to the U.S. Census Bureau and the U.S. Department of Housing and Urban Development’s new residential construction data, in 2021, an estimated 1,337,800 new residential housing construction units were completed, a 4% increase from 2020. Therefore, the increasing construction activities are expected to fuel the construction composites market growth going forward. Strategic collaborations and partnerships have emerged as a key trend gaining popularity in the construction composites market. Major players in operating in the construction composites sector are focused on collaborations and partnerships to extend their growth in new areas and to strengthen their position. For instance, in March 2021, Air Conditioning Contractors of America (ACCA), a US-based association partnered with Owens Corning for an undisclosed amount. This partnership enables HVAC industry suppliers, manufacturers, and service providers to demonstrate their extraordinary commitment to ACCA members and the contracting industry through year-round support of the association’s activities. Owens Corning is a US-based composite manufacturing company. Also, in April 2021, Heatcon, a US-based aerospace company partnered with Hexcel Corporation for an undisclosed amount. This partnership granted HEATCON to sell Hexcel’s carbon fiber prepreg tapes and fabrics to support advanced air mobility vehicles and the unmanned aerial vehicles industry. Hexcel Corporation is a US-based composite manufacturing company. In March 2020, Owens Corning, a US-based company that manufactures composites acquired Hughes Brothers’ concrete reinforcement business Aslan FRP for an undisclosed amount. This acquisition broadens the Owens Corning portfolio of composite solutions and adds new products that will enhance the performance of concrete structures while being lighter-weight and more corrosion-resistant than conventional steel reinforcements. Hughes Brothers is a US-based company that produces and markets construction composites. Major players in the construction composites market are Advanced Environmental Recycling Technologies Inc., Hexcel Corporation, Exel Composites Oyj, Toray Industries Inc, Owens Corning, Teijin Limited, Fiberon LLC, Fibrolux GmbH, UPM, Strongwell Corporation, Diversified Structural Composites, TAMKO Building Products LLC, Mitsubishi Chemical Corporation, Aegion Corporation, and Gurit. North America was the largest region in the construction composites market in 2021. The regions covered in this report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, and Africa. The countries covered in the construction composites market report are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, USA. The global construction composites market is segmented - 1) By Resin Type: Polyester Resin, Vinyl Ester, Polyethylene, Polypropylene, Epoxy Resin 2) By Fiber Type: Carbon Fibers, Glass Fibers, Natural Fibers 3) By End-use Sector: Industrial, Commercial, Housing , Civil

Construction machinery refers to heavy machines designed for performing construction operations. Construction machinery is used in construction projects to load and unload materials, drive tools and materials into and out of a construction site, feed or retrieve material into a processing machine, handle raw materials by transporting them, cut trees and other vegetation, and many other applications. The main products of construction machinery are earthmoving, material handling, building & road construction equipment, and autonomous construction equipment. Earthmoving refers to machinery that is used for digging and moving large amounts of soil. The various applications involved are excavation & mining, lifting & material handling, earthmoving, transportation, and other applications. The various end-users involved are Oil & Gas, Construction & Infrastructure, Manufacturing, Mining, and other end-users. The construction machinery market research report is one of a series of new reports from The Business Research Company that provides construction machinery market statistics, including the construction machinery industry global market size, regional shares, competitors with a construction machinery market share, detailed construction machinery market segments, market trends and opportunities, and any further data you may need to thrive in the construction machinery industry. This construction machinery market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenarios of the industry. The global construction machinery market size will grow from $308.97 billion in 2022 to $336.72 billion in 2023 at a compound annual growth rate (CAGR) of 9.0%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The global construction machinery market size is expected to grow from $458.34 billion in 2027 at a CAGR of 8.0%. Increasing investment in infrastructure is anticipated to contribute to the construction machinery’s market growth. According to the World Economic Forum, the investment in infrastructure worldwide is projected to reach $79 trillion by 2040. Similarly, in the Union Budget 2022-23, the government of India allocated Rs. 10 lakh crore (US$ 130.57 billion) to massively push the infrastructure sector. The surge in investments in infrastructure is likely to generate higher demand for construction machinery and equipment, thereby driving the growth of the construction machinery market. The COVID-19 outbreak acted as a major restraint on the construction machinery market during 2020. The rapid surge in the number of people suffering from coronavirus forced the government to impose lockdowns resulting in the temporary closure of many businesses. Large infrastructure building projects were kept on hold due to social distancing practices imposed worldwide. This led to decreased demand for construction machinery and companies in the market had to halt or slow down their production impacting the revenues of the market. For instance, Hitachi Construction Machinery Co., Ltd., a Japan-based construction company engaged in manufacturing and sales of construction and transportation machinery announced the halt of production at many sites including Russia, the Middle East, Africa, and Asia during COVID-19 lockdowns. In recent years, the construction machinery market has seen a number of strategic initiatives, including partnerships and the launch of innovative products. Major companies in the market are continuously focusing on collaborating with other companies to expand their product portfolio and geographical presence. For instance, Caterpillar Inc., a US-based construction machinery and equipment manufacturer announced a partnership agreement with Newmont Mining, a US-based gold producer to develop underground vehicle automation technology. The companies together plan to focus on Caterpillar's semi-autonomous system for underground loaders and improving existing technology. In October 2021, National Equipment Dealers LLC., a US-based company that rents, sells, and services large heavy equipment acquired Grove River Machinery for an undisclosed amount. With the Grove River acquisition, National Equipment Dealers LLC would successfully grow scale, filling the company’s geographic gaps, and expanding its reach into Georgia. Grove River Machinery is a Georgia-based company engaged in heavy equipment dealerships. The company represented the product line of Hyundai and Kobelco construction equipment. Major players in the construction machinery market are Caterpillar Inc., Komatsu Ltd., Deere & Company, Volvo AB, Hitachi Ltd., Zoomlion Heavy Industry Science, and Technology Co. Ltd., Liebherr Group, EXOR Group, Doosan Infracore Co. Ltd., and Oshkosh Corp. Asia-Pacific was the largest region in the construction machinery market in 2022. Western Europe was the second-largest region in the global construction machinery market. The regions covered in the global construction machinery report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, and Africa. The countries covered in the construction machinery market are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, and USA. The construction machinery market consists of sales of construction machinery, including backhoes, bulldozers, construction and surface mining-type rock drill bits, construction-type tractors, off-highway trucks, pile-driving equipment, portable crushing, pulverizing and screening machinery, powered post hole diggers, road graders and surface mining machinery. Values in this market are factory gate values, that is the value of goods sold by the manufacturers or creators of the goods, whether to other entities (including downstream manufacturers, wholesalers, distributors, and retailers) or directly to end customers. The value of goods in this market includes related services sold by the creators of the goods. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global construction machinery market is segmented - 1) By Product: Earthmoving, Material Handling, Building & Road Construction Equipment, Autonomous Construction Equipment 2) By Application: Excavation & mining, Lifting & material handling, Earth moving, Transportation, Other Applications 3) By End User: Oil & Gas, Construction & Infrastructure, Manufacturing, Mining, Other End Users

Waste management services are those services that are involved in all aspects of waste management, from collection to recycling and monitoring. These services provide waste collection, treatment, and disposal services, remediation services, operating materials recovery facilities, or provide septic tank pumping and related services. Remediation services are those services involved in reversing or stopping environmental damage and the removal of polluted or contaminated soil, sediment, surface water, or groundwater. The main types of waste management and remediation services are waste collection, waste treatment and disposal, remediation services, and other waste management services. Waste collection is the process of municipal services or similar organizations collecting and transporting waste to a treatment or disposal facility, as well as public or private corporations, specialized enterprises, or the general government. The different modes include online, and offline and are used in residential, manufacturing, retail/wholesale, construction, and demolition. The waste management and remediation services market research report is one of a series of new reports from The Business Research Company that provides waste management and remediation services market statistics, including waste management and remediation services industry global market size, regional shares, competitors with waste management and remediation services market share, detailed waste management and remediation services market segments, market trends and opportunities, and any further data you may need to thrive in the waste management and remediation services industry. This waste management and remediation services market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenario of the industry. The global waste management and remediation services market grew from $661.46 billion in 2022 to $712.07 billion in 2023 at a compound annual growth rate (CAGR) of 7.7%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The waste management and remediation services market is expected to grow to $928.07 billion in 2027 at a CAGR of 6.8%. Waste management and remediation services are increasingly using sensors for managing waste collected. A sensor is a device that detects and responds to some type of input from the physical environment. The specific input could be light, heat, motion, moisture, pressure, or any other environmental phenomena. Sensors let waste management companies know that bins are full and need to be serviced. Sensor technology can also be used to sort recyclables quickly and efficiently, thereby reducing manual work and encouraging higher recycling rates. This enables companies to have complete visibility of containers which helps them to reduce costs. For instance, the OnePlus Metro from OnePlus Systems is an ultrasonic trash can sensor that lets waste management companies determine if waste containers are full. Major companies in the waste management and remediation services market include Waste Management Inc., Suez Environnement SA, Republic Services, Waste Connections, Clean Harbors, Stericycle, Astellas Pharma Inc., Covanta, Advanced Disposal Services Inc., and Sacyr S.A. Western Europe was the largest region in the waste management and remediation services market in 2022. Asia-Pacific was the second-largest region in the waste management and remediation services market. The regions covered in the waste management and remediation services market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, and Africa. The waste management and remediation services market consists of revenues earned by entities that provide waste collection, treatment, and disposal services, remediation services, operate materials recovery facilities, or provide septic tank pumping and related services. The market value includes the value of related goods sold by the service provider or included within the service offering. Only goods and services traded between entities or sold to end consumers are included. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global waste management and remediation services market is segmented - 1) By Type: Waste Collection, Waste Treatment And Disposal, Remediation Services, Other Waste Management Services 2) By Application: Residential, Manufacturing, Retail/Wholesale, Construction and Demolition 3) By Mode: Online, Offline

Wastewater treatment equipment is a device that removes all the impurities from the wastewater before discharging back into natural bodies. They are used to purify the wastewater. The main equipment in wastewater treatment equipment is filtration equipment, membrane equipment, thermal distillation equipment and evaporators, and disinfection equipment. Membrane equipment is a barrier in water treatment that allows water to pass through while preventing undesired substances from passing through as well. The application areas of wastewater treatment equipment include municipal, and industrial with primary, secondary, and tertiary processes that are smooth and textured. The wastewater treatment equipment market research report is one of a series of new reports from The Business Research Company that provides wastewater treatment equipment market statistics, including wastewater treatment equipment industry global market size, regional shares, competitors with a wastewater treatment equipment market share, detailed wastewater treatment equipment market segments, market trends and opportunities, and any further data you may need to thrive in the wastewater treatment equipment industry. This wastewater treatment equipment market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenarios of the industry. The global wastewater treatment equipment market size will grow from $31.49 billion in 2022 to $32.77 billion in 2023 at a compound annual growth rate (CAGR) of 4.1%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The global wastewater treatment equipment market size is expected to grow to $38.88 billion in 2027 at a CAGR of 4.4%. The wastewater treatment equipment market is being driven by a rapidly increasing disposal of wastewater from the industrial as well as residential sectors. The high quantity of wastewater being disposed of is increasing the necessity to treat the water using wastewater treatment equipment. According to a research study published by the European Environment Agency (EEA), the percentage of the residential population disposing of wastewater in northern European countries is always above 80 % out of which more than 70 % received tertiary wastewater treatment. Furthermore, in central European countries, the proportion of the population connected to urban wastewater treatment in southern, south-eastern, and eastern Europe is 97% out of which 75% are receiving tertiary wastewater treatment. According to the international water association (IWA)'s wastewater report, the Philippines accounted for about a million cubic meters of wastewater disposed of every year by industrial sectors in Manila Bay and Laguna Lake. These factors are driving the wastewater treatment equipment market. The wastewater treatment equipment market is being restrained by high installation and operational costs of the equipment, leading to indirect investment. The wastewater treatment apparatus is equipped with a sophisticated programmable logic controller (PLC) system and instrumentation system that increase the overall equipment costs and energy consumption costs. Further, the high energy consumption of wastewater treatment equipment leads to a high cost of operation and maintenance due to a large amount of sludge generated. For instance, most wastewater generated in Sri Lanka is untreated, with about 65.3 million liters/day of domestic wastewater left untreated in the capital city of Colombo. According to a report by Black & Veatch on the Wastewater industry, managing capital costs and operational costs are the major challenges of the wastewater industry. Also, according to a report by the UN (United Nations) on water quality, 80% of sewage in developing countries is discharged untreated directly into water bodies, and industries across the world dump an estimated 300-400 MT of polluted waste in water bodies every year to reduce treatment costs. For instance, in Finland, an initial investment of 7000 to 10000 euros is required to install a modern on-site wastewater treatment plant. Further, the operating costs for the same are also high as they comprise the chemical, electricity, and service agreement cost. The increasing use of Internet of Things (IoT) sensors is the latest trend in the wastewater treatment equipment market. The Internet of Things (IoT) is a network of physical devices that communicate over the internet. The environmental sensors measure pollution-causing particles in air and water, thereby monitoring air or water quality. It also senses radiations and hazardous chemicals in the environment. A majority of the organizations that function in the water industry depend on the Supervisory Control and Data Acquisition (SCADA) systems to monitor the water distribution systems. The use of IoT in water systems uses smart sensors that detect information about the water quality, temperature changes, pressure changes, and potentially any chemical leaks. For instance, companies in the water treatment industry such as Biz4solutions company, are providing innovative solutions for effective wastewater management and water testing analytics through IoT systematic water management to manage water recycling, reduce the number of water leakages, and efficiently manage wastewater. The wastewater treatment equipment market in the USA is regulated by the United States Environmental Protection Agency (EPA). The EPA has established standards for secondary treatment of wastewater for publicly owned treatment works (POTWs). These standards have certain technology-based requirements for municipal wastewater treatment. The EPA specified a list of products approved state-wise for onsite treatment of wastewater. Governments globally are continuously investing in environmental regulations and policies to be implemented by businesses, manufacturing companies, and even households. The US government passed the Frank R. Lautenberg Chemical Safety Act specifying guidelines for companies in the chemicals industry for proper management, storage, and disposal of mercury to preserve state environmental authorities related to air, water, waste disposal, and treatment. Further, the EPA also specifies national standards for decentralized wastewater treatment. In addition, regulatory bodies such as National Sanitation Foundation (NSF) and the American National Standards Institute (ANSI) formulate and develop onsite wastewater treatment standards. Major players in the wastewater treatment equipment market are Suez, 3M, GE Water, Culligan International Company, DOW Water & Process Solutions, Pentair PLC., Aquatech International, Danaher Corporation, Ecolab, and Chembond Chemicals Limited. Asia-Pacific was the largest region in the wastewater treatment equipment market in 2022. Western Europe was the second largest region in the global wastewater treatment equipment market. The regions covered in the global wastewater treatment equipment market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, and Africa. The countries covered in the wastewater treatment equipment market are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, the UK, and the USA. The wastewater treatment equipment market consists of sales of trickling filter, clarifier, aerated lagoon, and activated sludge. Values in this market are factory gate values, that is the value of goods sold by the manufacturers or creators of the goods, whether to other entities (including downstream manufacturers, wholesalers, distributors and retailers) or directly to end customers. The value of goods in this market includes related services sold by the creators of the goods. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global wastewater treatment equipment market is segmented - 1) By Equipment: Filtration Equipment, Membrane Equipment, Thermal Distillation Equipment And Evaporators, Disinfection Equipment 2) By Process: Primary, Secondary, Tertiary 3) By Texture: Smooth, Textured 4) By Application: Municipal, Industrial

A waste disposal unit refers to an electrically operated fitment, installed under the kitchen sink between the drain and the trap. It quickly and effectively discards any food item. Waste gets broken down into smaller pieces and easily gets through the plumbing system. The main types of waste disposal units are garbage disposable units and food waste disposable units. Garbage disposal units are usually located at the underside of a sink and are designed to collect solid food waste in a grinding chamber. When disposal is turned on, a spinning disc, or impeller plate, turns rapidly, forcing the food waste against the outer wall of the grinding chamber. This pulverizes the food into tiny bits, which then get washed by water through holes in the chamber wall. While disposals do have two blunt metal "teeth," called impellers, on the impeller plate, they do not have sharp blades. The waste disposal units are used in household application and commercial applications that are distributed through OEM and aftermarket sales channel. The waste disposal units market research report is one of a series of new reports from The Business Research Company that provides waste disposal units market statistics, including waste disposal units industry global market size, regional shares, competitors with a waste disposal units market share, detailed waste disposal units market segments, market trends and opportunities, and any further data you may need to thrive in the waste disposal units industry. This waste disposal units market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenario of the industry. The global waste disposable units market size will grow from $11.25 billion in 2022 to $12.04 billion in 2023 at a compound annual growth rate (CAGR) of 7.0%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The global waste disposable units market size is expected to grow to $14.1 billion in 2027 at a CAGR of 4.0%. The waste discharge is increasing rapidly due to population growth and increasing manufacturing activity in many emerging markets. Population growth, rapid urbanization and increasing consumption due to rising disposable income will further increase the demand for garbage disposable units. According to the World Bank, by 2025, the waste volume generated per person per day is estimated to reach 1.42 kg. The International Solid Waste Association has forecasted that globally municipal solid waste volumes will rise by a factor of 2.37 by 2050. The focus on environmental issues among many governments and industries remained limited. Governments, especially in developing countries, were more focused on infrastructural development and industrialization. This lack of focus hampered the market for garbage disposal units.For instance, the Kyoto Protocol, which was aimed at reducing greenhouse gas emissions worldwide, did not result in significant reductions in greenhouse gas emissions as many countries did not agree to or stick to the targets mentioned in the agreement.  Waste-disposable unit manufacturers are focusing on developing advanced, environmentally friendly solutions such as waste-to-energy solutions.The disposers convert the waste into fine particles, which further leads to the formation of biogas. The generated biogas, in the form of biofuel, can be used to generate electricity. Major players in the waste disposal units’ market are InSinkErator, Waste King, GE, Frigidaire, MOEN, Whirlpool, KitchenAid, Kenmore, Joneca Corporation, Salvajor, Hobart, Emerson, Anaheim, Soocen Technology, and Apollo Kitchen Equipment. Asia-Pacific was the largest region in the waste disposal units market in 2022. Western Europe was the second-largest region in the global waste disposable units market. The regions covered in the global waste disposable units market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, the Middle East, and Africa. The countries covered in the waste disposal units market are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK and USA. The waste disposal units market consists of sales of garbage disposable units and food waste disposable units. Values in this market are factory gate values, that is the value of goods sold by the manufacturers or creators of the goods, whether to other entities (including downstream manufacturers, wholesalers, distributors and retailers) or directly to end customers. The value of goods in this market includes related services sold by the creators of the goods. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global waste disposable units market is segmented - 1) By Type: Garbage Disposable Units, Food Waste Disposable Units 2) By Application: Household Application, Commercial Application 3) By Sales Channel: OEM, Aftermarket

Construction is the process of building, altering, repairing, improving, or demolishing any structures or buildings using a detailed design and plan. The different types of construction are buildings construction, heavy and civil engineering construction, specialty trade contractors, land planning and development. Building construction includes the dismantling of existing structures, the construction of new structures, the addition of latest structures to existing structures, and the required modifications to existing structures to correspond to any recent additions. The different sectors include private and public. These type of services are provided by large contractors and small contractors. The global construction market grew from $14503.87 billion in 2022 to $15461.84 billion in 2023 at a compound annual growth rate (CAGR) of 6.6%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The construction market is expected to grow to $19519.26 billion in 2027 at a CAGR of 6.0%. The increasing construction activities in emerging markets are expected to propel the growth of the construction market over the coming years. Emerging markets which registered robust construction activity included China, Brazil, India, Saudi Arabia and Indonesia. For instance, according to the National Bureau of Statistics, construction output contributed for 25.9% of China's GDP in 2020, up from 6.2% in 2019. This rapid growth in construction activity contributed to the growth of the construction market. Construction costs have increased steadily due to rising material costs in the historic period. Companies in the industry experienced subdued growth in their profits with rising prices of materials such as crude oil, a key component of asphalt reached $41.96 per barrel in 2020, softwood lumber, a major component used for buildings construction, rose by 112% in February 2021 compared to 2020. Therefore, high material prices adversely affected the construction market during historic period. Building construction companies are increasingly using green construction techniques to build energy efficient buildings and reduce construction costs. Green construction refers to the practice of using sustainable building materials and construction processes to create energy-efficient buildings with minimal environmental impact. According to World Green Building Trends Survey, about 60% of construction firms across the globe were involved in green construction projects . Certifications such as Leadership in Energy and Environmental Design (LEED) help construction companies to develop high-performance, sustainable residential and commercial buildings, and also offer a variety of benefits, from tax deductions to marketing opportunities. Sustainable construction materials such as natural paints and steel beams made from recycled material are being widely used in the UK. Other green construction techniques such as cross-ventilation for more natural environment, green construction software such as Construction Suite to ensure green compliance, and Green Globes management tool are also being used in the construction industry. For instance, some, Major companies using green construction techniques include Turner Construction Co, Clark Group, AECOM, Hensel Phelps and Holder Construction. Major companies in the market include China State Construction Engineering Corporation Ltd., China Railway Group Ltd., China Railway Construction Corporation Limited, China Communications Construction Co Ltd., China Evergrande Group Asia-Pacific was the largest region in the construction market in 2022. North America was the second-largest region in the construction market. The regions covered in the construction report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East and Africa. The countries covered in the construction market report are Argentina, Australia, Austria, Belgium, Brazil, Canada, Chile, China, Colombia, Czech Republic, Denmark, Egypt, Finland, France, Germany, Hong Kong, India, Indonesia, Ireland, Israel, Italy, Japan, Malaysia, Mexico, Netherlands, New Zealand, Nigeria, Norway, Peru, Philippines, Poland, Portugal, Romania, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Sweden, Switzerland, Thailand, Turkey, UAE, UK, USA, Venezuela, Vietnam. The construction market includes revenues earned by entities by constructing buildings or engineering projects (such as highways and utility systems). Establishments that prepare sites for new construction and those that subdivide land for sale as building sites are included in this market. The construction market includes new work, additions, alterations, maintenance, and repairs. The market also includes modular building construction, prefabricated building construction, 3D building construction and green building construction The market value includes the value of related goods sold by the service provider or included within the service offering. Only goods and services traded between entities or sold to end consumers are included. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global construction market is segmented - 1) By Type: Buildings Construction, Heavy And Civil Engineering Construction, Specialty Trade Contractors, Land Planning And Development 2) By End User: Private, Public 3) By Type of Contractor: Large Constractors, Small Contractors Subsegments Covered: Residential Building Construction, Nonresidential Building Construction, Utility System Construction, Highway, Street, And Bridge Construction, Other Heavy And Civil Engineering Construction, Foundation, Structure, And Building Exterior Contractors, Building Equipment Contractors, Building Finishing Contractors, Other Specialty Trade Contractors, Residential Land Planning And Development, Commercial And Institutional Land Planning And Development, Industrial Land Planning And Development

Construction equipment rental refers to the service of renting out small and large construction equipment required for the execution, completion, and maintenance of construction work. Renting construction equipment saves construction contractors the cost of new equipment, labour costs, maintenance costs, and operational costs. The main construction rental equipment includes earthmoving, material handling, road building, and concrete. Earthmoving construction equipment moves soil and other material on heavy construction sites in preparation for constructing buildings. The different construction equipment rental products include backhoes, excavators, loaders, crawler dozers, cranes, concrete pumps, compactors, transit mixers, and concrete mixers, which are used in residential, commercial, and industrial applications. The construction equipment rental research report is one of a series of new reports from The Business Research Company that provides construction equipment rental statistics, including global market size, regional shares, competitors with construction equipment rental shares, detailed construction equipment rental segments, market trends and opportunities, and any further data you may need to thrive in the construction equipment rental industry. This construction equipment rental research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenario of the industry. The global construction equipment rental market size grew from $95.23 billion in 2022 to $100.1 billion in 2023 at a compound annual growth rate (CAGR) of 5.1%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The construction equipment rental market size is expected to grow to $121.76 billion in 2027 at a CAGR of 5.0%. The growing construction industry is expected to propel the growth of the construction equipment rental market going forward. The construction industry is rising because of ongoing urbanization, impending infrastructural projects, and a growing population base. The construction sector uses a variety of construction equipment such as tower cranes, bulk material handling, transit mixers, batching plants, concrete pumps, and others. Renting this equipment helps contractors reduce the cost of purchase and maintenance. According to the global construction review report published in 2021, construction will be a driving force in global economic growth in the decade to 2030, with output estimated to be 35% greater than in the previous ten years to 2020. Hence, the growing construction industry will drive the growth of the construction equipment rental market. Replacing conventional equipment with telematics-integrated machinery is a rising trend in the construction equipment market. Telematics is integrated into the construction equipment for GPS fleet tracking, maximizing fleet utilization, safeguarding equipment from theft, improving billing, equipment utilization, and others. For instance, in 2020, Appareo, a US-based manufacturer of electronic and software solutions, launched a cellular asset tracking device for off-highway equipment called  AT-130 (IP69K). The device is embedded with GPS and cellular capabilities have a high battery life and can withstand high pressure. The high-performance positioning and motion-sensing capabilities ensure that motion-based reporting is done based on true machinery repositioning, which helps to extend the battery life of the equipment and reduce false alarms. In October 2022, H&E Equipment Services, Inc., a US-based integrated equipment company that provides equipment rentals, sales, parts, and service, acquired One Source Equipment Rentals Inc. for an undisclosed amount. This acquisition will help H&E Equipment Services, Inc. expand its presence in Illinois, Indiana, and Kentucky by adding 10 equipment rental locations. One Source Equipment Rentals Inc. is a US-based supplier of construction and industrial equipment on rent. Major players in the construction equipment rental market are H&E Equipment Services, Inc., Maxim Crane Works, L.P., Boels Rentals, United Rentals Inc., Ashtead Group PLC., Loxam, Herc Holdings Inc., Aktio Corporation, Kanamoto Co., Ltd., Taiyokenki Rental Co., Ltd., Cramo, Ramirent PLC., Kiloutou, Speedy Hire PLC., Nishio Rent All Co. Ltd., The Hertz Corporation, Ahern Rentals, and Nikken Corporation North America was the largest region in the construction equipment rental market in 2022. Asia-Pacific is expected to be the fastest-growing region in the forecast period. The regions covered in the construction equipment rental market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, the Middle East, and Africa. The countries covered in the construction equipment rental market report are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, the UK, and the USA. The construction equipment rental market consists of revenues earned by entities that rent out construction-related machinery, equipment, and tools to other contractors and professionals for a flat rate on a daily, weekly, or monthly basis. The market value includes the value of related goods sold by the service provider or included within the service offering. Only goods and services traded between entities or sold to end consumers are included. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global construction equipment rental market is segmented - 1) By Equipment: Earthmoving, Material Handling, Road Building And Concrete 2) By Product: Backhoes, Excavators, Loaders, Crawler Dozers, Cranes, Concrete Pumps, Compactors, Transit Mixers, Concrete Mixers 3) By Application: Residential, Commercial, Industrial

The construction adhesives are used for waterproofing, roofing, carpet laying, cladding, and insulation applications. Construction adhesives are materials that can permanently bind diverse materials together with better efficiency and design flexibility. These are used to attach drywall, tile, holdings, and fixtures to walls, ceilings, and floors during construction activities. The main types of construction adhesives are water-based, solvent-based, hot-melt, and reactive. Water-based adhesives are used for fast action and to create high-strength bonds in construction activities. These use water as a solvent to create the coating. The various resin types used in construction are acrylic adhesive, polyurethane (PU), polyvinyl acetate (PVA), and epoxy, and they offer various applications such as residential, commercial, and industrial. The construction adhesives market research report is one of a series of new reports from The Business Research Company that provides construction adhesives market statistics, including construction adhesives industry global market size, regional shares, competitors with a construction adhesives market share, detailed construction adhesives market segments, market trends and opportunities, and any further data you may need to thrive in the construction adhesives industry. This construction adhesives market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenario of the industry. The global construction adhesives market size grew from $10.26 billion in 2022 to $11.23 billion in 2023 at a compound annual growth rate (CAGR) of 9.4%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The construction adhesives market size is expected to grow to $15.09 billion in 2027 at a CAGR of 7.7%. The increase in construction activities is expected to propel the growth of the construction adhesives market going forward. Construction is the process of putting together materials to create enormous structures. The increasing construction activities for residential and non-residential buildings are promoting the construction adhesives market's growth. For instance, according to the U.S. Census Bureau and the U.S. Department of Housing and Urban Development’s new residential construction data, in 2021 1,337,800 new residential housing construction units were completed, a 4% increase from 2020. Therefore, the increase in construction activities is fueling the construction adhesives market's growth. Construction companies are increasingly using bio-based adhesives in their construction activities. Growing awareness of environmental problems and diminishing fossil resources has led to the development of bio-based adhesives that have a low carbon footprint and can attach well to a variety of substrates. The bio-based adhesives consist of renewable, bio-based materials that are environmentally friendly and have beneficial mechanical and chemical properties that make them more efficient. For instance, in May 2021, Henkel AG & Co., a Germany-based chemicals company, announced the development of LOCTITE HHD 3544F, the industry’s first bio-based adhesive, whose two-thirds of the content is sourced from renewable, plant-based feedstocks. In July 2022, H.B. Fuller Company, a US-based manufacturer and distributor of sealants, adhesives, and other specialty chemical products, acquired Fourny NV for an undisclosed amount. The acquisition is a strategic move in H.B. Fuller's plan to develop its manufacturing, product line, and workforce in Europe, especially in developing industries like roofing and building envelopes, and to improve supply chain management in this region. Fourny NV is a Belgium-based formulator of industrial adhesives. Major players in the construction adhesives market are 3M, Adhesives Technology Corporation, Arkema, Avery Dennison Corporation, DAP Products Inc., The Dow Chemical Company, H.B. Fuller Company, Henkel AG & Co. KGaA, ITW Polymer Sealants, Mapei S.p.A., Sika AG, Wacker Chemie AG, Ashland Inc., Don Construction Products Limited, Franklin International, and Parker Hannifin Corp. Asia-Pacific was the largest region in the construction adhesives market in 2022. Asia-Pacific is expected to be the fastest-growing region in the forecast period. The regions covered in the construction adhesives market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, the Middle East, and Africa. The countries covered in the construction adhesives market report are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, the UK, and the USA. The construction adhesive market consists of sales of construction adhesives by chemistry, such as acrylic adhesives, polyurethanes, and silicones. Values in this market are ‘factory gate’ values, that is, the value of goods sold by the manufacturers or creators of the goods, whether to other entities (including downstream manufacturers, wholesalers, distributors, and retailers) or directly to end customers. The value of goods in this market includes related services sold by the creators of the goods. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global construction adhesives market is segmented - 1) By Type: Water-based, Solvent-based, Hot-melt, Reactive 2) By Resin Type: Acrylic Adhesive, Polyurethane (PU), Polyvinyl Acetate (PVA), Epoxy 3) By Application: Residential, Commercial, Industrial