Global Mechanical Power Transmission Equipment Market

Cement and concrete products refer to types of structures made of aggregate, or hard, chemically inert particle material such as sand and gravel, which is joined by cement and water to form products such as concrete pipes, bricks, and paving blocks to provide strength, durability, safety, and affordability to the construction of buildings and commercial offices. The main types of cement and concrete products are cement, ready-mix concrete, concrete pipe, brick, and block, and other concrete products. Readymix concrete refers to the concrete that is manufactured in a batch plant and is used for construction projects. The different products include rapid hardening cement, low heat cement, white cement, hydrophobic cement, and other products (coloured cement, portland pozzolana cement) and are used in residential, and non-residential. The cement and concrete products market research report is one of a series of new reports from The Business Research Company that provides cement and concrete products market statistics, including cement and concrete products industry global market size, regional shares, competitors with a cement and concrete products market share, detailed cement and concrete products market segments, market trends and opportunities, and any further data you may need to thrive in the cement and concrete products industry. This cement and concrete products market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenario of the industry. The global cement and concrete products market grew from $364.12 billion in 2022 to $394.02 billion in 2023 at a compound annual growth rate (CAGR) of 8.2%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The cement and concrete products market is expected to grow to $527.78 billion in 2027 at a CAGR of 7.6%. Governments globally launched initiatives to provide funds and subsidies to make housing affordable, especially for low-income families, which drove the demand for cement and concrete. These subsidies allowed customers to borrow money at low-interest rates to invest in new houses. The government of Australia, for example, provides a grant of $15,000 through the ‘First Home Owners Grant’ scheme for the purchase or construction of homes by first-time buyers. The Indian Government launched the “Housing for All by 2022” mission which provides grants for slum rehabilitation and construction of new houses. Such government initiatives encouraged people to construct new houses and drive growth in the housing market increasing the demand for cement in the historic period. During the forecast period, the shortages of coal supply were a major restraint on the cement manufacturing industry. Cement manufacturing is an energy-intensive process and a major portion of this energy comes from burning coal, especially in developing countries. Coal supply reduced globally during the historic period due to logistics issues and a decline in investments in coal extraction, negatively affecting the cement manufacturing industry. This increased the costs of coal, and also the production costs for cement manufacturers, restricting the growth of the cement and concrete market. Cement manufacturing plants are increasingly using digital technologies such as the internet of things (IoT) to improve plant efficiencies. IoT is a network of physical devices that communicate over the internet. IoT helps in remote monitoring and predictive maintenance of a cement plant. Remote monitoring is used to oversee operations of big vehicles in the quarries and to report on key metrics such as fuel consumption per ton and operating hours. IoT can also be used to predict potential malfunctions and maintenance needs. In cement plants, predictive maintenance can improve up-time on critical cement equipment such as grinding mills and kilns. Other applications of IoT in the cement industry include tracking and measuring the durability of concrete mixture, reporting on compliance to international standards, and connected logistics to improve quarry production. Zoom link, a ready-mix concrete production equipment manufacturer, is actively testing data-based metrics to improve operations of vehicles used in quarries. Major companies in the cement and concrete products market include China National Building Material Group Co.Ltd., LafargeHolcimLtd., HeidelbergCement AG, Anhui Conch Cement Company Limited, CRH plc, Votorantim S.A, Cemex SAB de CV, UltraTech Cement Limited, Grasim Industries Limited, and Taiheiyo Cement Corporation. The Asia-Pacific was the largest region in the cement and concrete products market in 2022. Western Europe was the second-largest region in the cement and concrete products market. The regions covered in the cement and concrete products report include Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, and Africa. The countries in the cement and concrete products market include Argentina, Australia, Austria, Bangladesh, Belgium, Brazil, Canada, Chile, China, Colombia, Czech Republic, Denmark, Egypt, Finland, France, Germany, Hong Kong, India, Indonesia, Ireland, Israel, Italy, Iran, Japan, Malaysia, Mexico, Netherlands, New Zealand, Nigeria, Norway, Peru, Philippines, Poland, Portugal, Romania, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Sweden, Switzerland, Thailand, Turkey, UAE, UK, Ukraine, USA, Vietnam. The cement and concrete products market consists of sales of bridge girders, structural components, and wall panels. Values in this market are ‘factory gate’ values, that is the value of goods sold by the manufacturers or creators of the goods, whether to other entities (including downstream manufacturers, wholesalers, distributors and retailers) or directly to end customers. The value of goods in this market includes related services sold by the creators of the goods. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global cement and concrete products market is segmented - 1) By Type: Cement, Ready-Mix Concrete, Concrete Pipe, Brick, and Block, Other Concrete Products 2) By Product: Rapid Hardening Cement, Low Heat Cement, White Cement, Hydrophobic Cement, Other Products (Colored Cement, Portland Pozzolana Cement) 3) By Application: Residential, Non-Residential

Construction toys refer to building blocks that are made up of a set of basic components that are supplied and configured to enable children to construct structures of their own design that can then be disassembled and redesigned into something new. The main types of construction toys are bricks & blocks, tinker toys, and others. Toys in the bricks and blocks segment also known as building blocks are solid shapes that are used for building games. Some are only plain wooden planks, whereas others are more complex, such as the plastic interlocking bricks. Tinker toys segment includes the Tinkertoy construction set which is a children's toy construction set made up of tiny pieces that are put together to form shapes or objects. Toys in the other segment include toys like train sets, architectural sets, and educational sets among others. The raw material used in manufacturing construction toys includes wood, polymer, metal, and others. These categories of toys are sold through various channels such as supermarkets & hypermarkets, convenience stores, and online stores. The construction toys market research report is one of a series of new reports from The Business Research Company that provides construction toys market statistics, including construction toys industry global market size, regional shares, competitors with a construction toys market share, detailed construction toys market segments, market trends and opportunities, and any further data you may need to thrive in the construction toys industry. This construction toys market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenarios of the industry. The global construction toys market size grew from $9.59 billion in 2022 to $10.17 billion in 2023 at a compound annual growth rate (CAGR) of 6.0%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The construction toys market size is expected to grow to $12.97 billion in 2027 at a CAGR of 6.3%. A rise in disposable income is expected to propel the growth of the construction toys market in the forecast period. An increase in disposable income is fuelling a healthy surge in leisure spending across the world, with an increase in disposable income, consumers are willing to invest to boost their standard of living, resulting in the purchase of a vast range of consumer products and recreational products such as toys. For example, in the USA, disposable personal income rose from $14,974 billion in 2019 to $17,515.2 billion in 2020. The rise in per capita net disposable income led customers to increase their spending on toys and games, which in turn boosted the demand for construction toys, driving the market growth. The introduction of eco-friendly construction toys is the key trend gaining popularity in the construction toys market. Key players are coming up with eco-friendly and sustainable products as concerns over the safety of the raw materials used in construction toys have grown and to maintain a competitive edge over the other players. For example, in January 2020, Mattel, a US-based toy manufacturing company launched an eco-friendly bio-based Mega Bloks line, consisting of the Mega Bloks Polar Friends, Safari Friends and Woodland Friends sets wherein all of the sets would be made from bio-based resins and packaged in entirely recyclable Forest Stewardship Council (FSC)-certified packaging. In February 2020, Never Wrong Toys, a US-based toy manufacturer in the areas of sports, action games, novelties, collectables, acquired Laser Pegs for an undisclosed amount. Never Wrong Toys will be able to grow the company, strengthen its brand portfolio and reposition itself in the industry with a new marketing strategy and retail sales strategy as a result of this acquisition. Laser Pegs is a US-based toy manufacturer that produces lighted construction toys. Major players in the construction toys market are Vtech, LEGO, Hasbro, Mattel, Mega Bloks, Bandai Co. Ltd., Melissa & Doug, Knex, Gebr. Märklin & Cie. GmbH, Meccano, Tegu, Spin Master Ltd., PlayMonster LLC., KnuckleStrutz, Magformers, Schylling Inc., Nanoblock, Polydron Limited, and Learning Resources. North America was the largest region in the construction toys market in 2022. The regions covered in the construction toys market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, the Middle East, and Africa. The countries covered in the construction toys market report are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, USA. The construction toy market consists of sales of figures, gear sets, magnetic sets, and stacking blocks. Values in this market are ‘factory gate’ values, that is the value of goods sold by the manufacturers or creators of the goods, whether to other entities (including downstream manufacturers, wholesalers, distributors and retailers) or directly to end customers. The value of goods in this market includes related services sold by the creators of the goods. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global construction toys market is segmented - 1) By Product: Bricks & Blocks, Tinker Toy, Other Products 2) By Raw Material: Wood, Polymer, Metal, Other Raw Materials 3) By Distribution Channel: Supermarkets & Hypermarkets, Convenience Stores, Online

An exterior wall system is the main concept in building design and construction that creates a wrapper around the masonry structure to protect it from environmental influences. The main types of exterior wall systems include ventilated facades, curtain walls, and non-ventilated facades. The ventilated facade refers to facade construction with an air gap between the insulation and cladding. A ventilated exterior wall system is a dry-installed exterior building envelope system developed to protect buildings against the combined action of rain and wind by counterbalancing the effects of water beating on walls and keeping the building dry. The main material types used in the exterior wall systems are bricks and stone; metal panels; plasterboards; fibre cement; ceramic tiles; EIFS; glass panels; high-pressure laminate boards; fibreglass panels; wood boards; and others (vinyl exterior). Exterior wall systems are used in residential, commercial, and industrial applications. The exterior wall systems market research report is one of a series of new reports from The Business Research Company that provides exterior wall systems market statistics, including exterior wall systems industry global market size, regional shares, competitors with exterior wall systems market share, detailed exterior wall systems market segments, market trends and opportunities, and any further data you may need to thrive in the exterior wall systems industry. This Exterior Wall Systems market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future state of the industry. The global exterior wall systems market size grew from $196.03 billion in 2022 to $214.39 billion in 2023 at a compound annual growth rate (CAGR) of 9.4%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The exterior wall systems market size is expected to grow to $333.56 billion in 2027 at a CAGR of 11.7%. The growing demand for green buildings is contributing to the growth of the exterior wall systems market. Green building and eco-friendly infrastructure reduce carbon emissions, energy consumption, and water consumption. For instance, according to a report by ANAROCK, a real estate services company, the demand for green buildings in India is expected to double by 2022, reaching nearly 10 billion sq ft, and is expected to be valued at $35-50 billion. Therefore, growing demand for green buildings will drive the growth of the exterior wall systems market. Product innovations are a key trend gaining popularity in the exterior wall systems market. Companies in the market are launching new, innovative products. For example, in March 2021, DuPont, a chemical company based in the United States, introduced the new DuPontTM Tedlar® polyvinyl fluoride (PVF) film for laminating exterior wall and roofing panels. In October 2021, DuPont, a US-based chemicals company offering exterior wall solutions, acquired MaxLife Industries’ ArmorWall Business for an undisclosed amount. Under this deal, DuPont has acquired the ArmorWall brand, patented technology, and a manufacturing facility in Salisbury, North Carolina to meet their current and future design and productivity challenges by providing a robust portfolio of sustainable and resilient building solutions for interior and exterior walls and technologies. MaxLife Industries is a US-based company offering high-performance building products, including exterior wall sheathing. Nippon Sheet Glass Co., Ltd., Saint-Gobain Gyproc India, Sika AG, Etex Group, Owens Corning, Evonik Industies AG, Holcim, USG Boral, DuPont, Fletcher Building, Egger Group, Toray Industries Inc., CSR Ltd., CRH, Cornerstone Building Brands, Schweiter Technologies AG, AGC Inc., and James Hardie Australia Pvt Ltd are major players in the exterior wall systems market. Asia-Pacific was the largest region in the exterior wall systems market in 2022. Asia-Pacific is expected to be the fastest-growing region in the forecast period. The regions covered in the exterior wall systems market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East and Africa. The countries covered in the Exterior Wall Systems market report are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, USA. The exterior wall systems market consists of sales of barrier walls, cavity walls and mass wall. Values in this market are ‘factory gate’ values, that is the value of goods sold by the manufacturers or creators of the goods, whether to other entities (including downstream manufacturers, wholesalers, distributors and retailers) or directly to end customers. The value of goods in this market includes related services sold by the creators of the goods. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global exterior wall systems market is segmented - 1) By Type: Ventilated Fascade, Curtain Wall, Non-Ventilated Fascade 2) By Materials: Bricks And Stone, Metal Panels, Plaster Boards, Fiber Cement, Ceramic Tiles, EIFS, Glass Panels, High-Pressure Laminate boards, Fiberglass Panels, Wood Boards, Other Materials (Vinyl) 3) By End-Use: Residential, Commercial, Industrial

Ceramics refer to inorganic, non-metallic materials created by forming and sintering natural or synthetic compounds at high temperatures that are generally made by mixing clay, earthen elements, powders, and water and shaping them into desired forms due to their properties such as high melting temperatures, chemical inertness, ruggedness, and low thermal and electrical conductivity. The main types of ceramics are traditional and advanced. Traditional ceramics are derived from common, naturally occurring raw materials such as clay minerals, feldspar, and quartz sand. These are used in structural clay products such as bricks, tiles, and pipes. The end-users of ceramics include building and construction, industrial, and medical, which are used for various applications including tiles, sanitary wares, abrasives, pottery, bricks, pipes, and other applications. The ceramics market research report is one of a series of new reports from The Business Research Company that provides ceramics market statistics, including ceramics industry global market size, regional shares, competitors with a ceramics market share, detailed ceramics market segments, market trends and opportunities, and any further data you may need to thrive in the ceramics industry. This ceramics market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenario of the industry. The global ceramics market size grew from $117.99 billion in 2022 to $129.56 billion in 2023 at a compound annual growth rate (CAGR) of 9.8%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The ceramics market size is expected to grow to $190.78 billion in 2027 at a CAGR of 10.2%. A rise in the construction industry is expected to propel the growth of the ceramics market. Due to the rapid increase in urbanization, more construction is being done in both developed and developing countries, which has increased the demand for ceramics and ceramics-related products. According to Invest India, between April 2000 and March 2021, India's urban development and construction activities totaled $26.08 billion and $24.72 billion, respectively.According to the global construction review report published in 2021, construction will be a driving force in global economic growth in the decade to 2030, with output estimated to be 35% greater than in the previous ten years to 2020. Therefore, the rise in the construction industry is driving the growth of the ceramics market. Technological advancements are a key trend gaining popularity in the ceramics market. Technological advancements, such as 3D printing, are knowledge discoveries that advance technology. For instance, in February 2021, CeramTec, a Germany-based manufacturer of ceramic products, developed a new 3D printing process named ROCAR 3D, for the production of construction elements made from technical ceramic material. It combines the unique material features of silicon carbide (SiSiC) with a quick and low-cost 3D printing technique. The new technology enables the development of components that can be produced later in large series in a particularly cost-effective and innovative fashion. In November 2021, Victoria PLC, a UK-based designer, manufacturer, and distributor of innovative flooring products, acquired Graniser Ceramics for a deal amount of $9.54 million. Victoria expects to be able to use Graniser's manufacturing experience and brand strength to increase operating profits as a result of this transaction. Graniser is a Turkey-based manufacturer and exporter of ceramic tiles. Major players in the ceramics market are 3M, AGC Ceramics Co., Ltd., Applied Ceramics Inc., CeremTec, CoorsTek, Corning Inc., Du-Co Ceramics Company, Imerys Ceramics, Kyocera Corporation, Materion Corporation, McDanel Advanced Ceramic Technologies, Mohawk Industries, Momentive Performance Materials Inc., Morgan Advanced Materials, Murata Manufacturing Co., Ltd., RauschertGmbH, Saint Gobain, Unifrax, Blasch Precision Ceramics Inc., Caesar, China Glass Holding, Sisecam Group, American Standard, SCHOTT AG, Ceramiche Caesar, Thermal Ceramics UK, Kajaria Ceramics Limited, Mohawk Industries, Inc., Momentive, RAK Ceramics and Saint-Gobain. Asia-Pacific was the largest region in the ceramics market in 2022 and is also expected to be the fastest-growing region in the forecast period. The regions covered in the ceramics market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, the Middle East, and Africa. The countries covered in the ceramics market report are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, USA. The ceramics market consists of sales of earthenware, stoneware, and porcelain. Values in this market are ‘factory gate’ values, that is the value of goods sold by the manufacturers or creators of the goods, whether to other entities (including downstream manufacturers, wholesalers, distributors and retailers) or directly to end customers. The value of goods in this market includes related services sold by the creators of the goods. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global ceramics market is segmented - 1) By Type: Traditional, Advanced 2) By End User: Building And Construction, Industrial, Medical 3) By Application: Tiles, Sanitary Wares, Abrasives, Pottery, Bricks and Pipes, Other Applications

Siding refers to protective materials attached to the exterior of a wall. Siding helps protect against exposure to elements, prevents heat loss, and helps improve the aesthetic of a building. Siding improves the aesthetic appeal of a building, along with properties such as durability and safety from extreme weathering has also driven the residential sector. The main types of siding are fiber cement, vinyl, metal, stucco, concrete, and stone, brick, wood, others. Fiber cement is a composite building and construction material that, because of its strength and longevity, is mostly utilized in roofing and facade goods. The end-user of siding is residential, non-residential, healthcare, education, hospitality, retail, offices, and others that can use siding in new construction, repair & maintenance. The siding market research report is one of a series of new reports from The Business Research Company that provides siding market statistics, including siding industry global market size, regional shares, competitors with a siding market share, detailed siding market segments, market trends and opportunities, and any further data you may need to thrive in the siding industry. This siding market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenario of the industry. The global siding market size grew from $90.12 billion in 2022 to $94.3 billion in 2023 at a compound annual growth rate (CAGR) of 4.6%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The siding market size is expected to grow to $114.97 billion in 2027 at a CAGR of 5.1%. The high durability and ability to enhance the aesthetic appearance of buildings are driving the growth of the siding market. Siding for new construction or repair helps improve various factors of a building. Siding can help ensure the structural integrity of a building, protecting water from causing the wood in a building to rot. Certain types of siding are also resistant to moisture or offer protection from harsh weather elements and wind up to 180 mph. Furthermore, it can help increase the resale value of a house by improving the aesthetic, various siding materials can be customized to offer an aesthetic finish to a building. These materials can also be resistant to UV rays, offering an aesthetic looking building in the long run The increasing use of sidings with good insulation to reduce energy consumption through air conditioners and heaters are shaping the siding market. Sidings with good insulation are commonly vinyl sidings. These sidings unlike standard sidings come with a preinstalled layer of insulating foam, which eliminates hollow spaces under the vinyl layer and helps increase the stiffness of the installation, ultimately improving the impact resistance. Furthermore, well-insulated sidings help have even temperatures throughout the house. Moreover, a well-insulated exterior helps reduce indoor heating requirements during winter, leading to substantial energy savings, including the roof and fenestrations (windows, entry doors, and skylights) in preventing heat leaks, ultimately saving on indoor cooling costs. In addition, insulated walls also provide a noise reduction, perfect for residential buildings on a busy street. In January 2022, Beacon, a US-based company acquired Cookeville-based wholesale distributor of exterior building materials, Crabtree Siding and Supply, for an undisclosed amount. Through this acquisition, Crabtree will make use of Beacon’s customer relations and supplier services along with strengthening its geographic footprint Major players in the siding market are Compagnie de Saint-Gobain S.A., Westlake Chemical, Louisiana Pacific Corporation, Etex Group, Boral Limited, James Hardie Industries PLC, Nichiha Corporation, Cornerstone Building Brands, SHERA, Döcke Extrusion Co. Ltd., Georgia Pacific Vinyl Siding, Kingspan, Ply Gem, Lixil Group Corporation, Saint-Gobain, DuPont, Tata Steel, Arconic, Alumasc, Rockwool, National Cladding, Revelstone, Wienerberger, Knauf, Carea Community Health Centre, and Al Ghurair Group. Asia-Pacific was the largest region in the siding market in 2022. Asia-Pacific is expected to be the fastest-growing region in the forecast period. The regions covered in the siding market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, the Middle East, and Africa. The countries covered in the siding market report are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, UK, USA. The siding market consists of sales of hardie board siding, natural wood siding and ever last composite siding. Values in this market are ‘factory gate’ values, that is the value of goods sold by the manufacturers or creators of the goods, whether to other entities (including downstream manufacturers, wholesalers, distributors and retailers) or directly to end customers. The value of goods in this market includes related services sold by the creators of the goods. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global siding market is segmented - 1) By Material: Fiber Cement, Vinyl, Metal, Stucco, Concrete And Stone, Brick, Wood, Other Materials 2) By End-User: Residential, Non-Residential, Healthcare, Education, Hospitality, Retail, Offices, Other End-Users 3) By Application: New Construction, Repair And Maintenance

Site remediation consulting services refers to the systematic steps of detecting, investigating, and assessing the hazards of suspected contaminated sites, reversing harmful changes in the soil, eliminating site pollution, and implementing follow-up measures. The main types of site remediation consulting services are bioremediation, pump & treat, in situ vitrification, thermal treatment, chemical treatment, excavation, soil washing, and others. Bioremediation is a field of biotechnology that uses living organisms such as microorganisms and bacteria to remove contaminants, pollutants, and poisons from soil, water, and other environments. The various forms of services include remediation services, soil remediation services, and water remediation services and are used by waste disposal sites, oil & gas, mining, chemicals & petrochemicals, manufacturing, agriculture, construction, and others. The site remediation consulting services market research report is one of a series of new reports from The Business Research Company that provides site remediation consulting services market statistics, including site remediation consulting services industry global market size, regional shares, competitors with a site remediation consulting services market share, detailed site remediation consulting services market segments, market trends and opportunities, and any further data you may need to thrive in the site remediation consulting services industry. This site remediation consulting services market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future state of the industry. The global site remediation consulting services market size will grow from $15.45 billion in 2022 to $16.48 billion in 2023 at a compound annual growth rate (CAGR) of 6.7%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The global site remediation consulting services market size is expected to grow to $20.49 billion in 2027 at a CAGR of 5.6%. The rapid rise in air and water pollution levels over the last decade and the increase in natural calamities such as floods, earthquakes, and landslides globally are driving the demand for site remediation consulting services. There has been an increase in the scope for ecological restoration and site remediation consulting services due to the rise in natural calamities such as tsunamis, hurricanes, and earthquakes. For instance, in 2021, according to the National Oceanic and Atmospheric Administration, United States suffered $145 billion in damages due to weather disasters. Floods on the Mississippi, Missouri, and Arkansas rivers were three of them. Flooding affected over 14 million people this year, with an additional 200 million at risk. The transformation from traditional consulting to cloud-based consulting is one of the key trends shaping the market growth of the site remediation consulting services market during the forecast period. Most of the remediation services companies will use mobile devices to handle work orders and are expected to transform from traditional consulting to software-as-a-service based consulting. The software-as-a-service platforms are delivered in the form of EHS compliance, industrial environmental compliance management, carbon reporting, water quality management, and QHSE (quality, environmental, health, and safety) management. Cloud-based consulting provides an easy approach for consulting services and needs renewal after a certain period of time. In May 2022, Partner Engineering and Science Inc. a US-based engineering, environmental, and energy consulting company, acquired EndPoint LLC for an undisclosed amount. The acquisition of EndPoint LLC would round out all abilities of Partner Engineering and Science Inc. to provide various services nationally and offer local expertise to their clients, many of which maintain assets in multiple markets. EndPoint LLC is a US-based environmental services, industrial hygiene, and site remediation company. With an emphasis on regulatory compliance, the company is expert in environmental and building media characterization and remediation. Major players in the site remediation consulting services market are Tetra Tech Inc., Environmental Resources Management, AECOM, CH2M Hill, Arcadis, Clean Harbors and Veolia Environmental Services. North America was the largest region in the site remediation consulting services market in 2022. Western Europe was the second largest region in the global site remediation consulting services market. The regions covered in the global site remediation consulting services market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, and Africa. The countries covered in the site remediation consulting services market are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, the UK, and the USA. The site remediation consulting services market consists of revenue earned by entities that advise businesses and other organizations on activities such as controlling environmental contamination from pollutants, toxic substances, and hazardous materials. These companies provide solutions for assessment, management, and remediation to prevent and correct land contamination. The market value includes the value of related goods sold by the service provider or included within the service offering. Only goods and services traded between entities or sold to end consumers are included. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for specified geography are consumption values – that is, they are revenues generated by organizations in the specified geography within the specified market, irrespective of where they are produced. It does not include revenues from resales either further along the supply chain or as part of other products. The global site remediation consulting services market is segmented - 1) By Type: Bioremediation, Pump & treat, In situ vitrification, Thermal treatment, Chemical treatment, Excavation, Soil washing, Other Types 2) By Application: Waste disposal sites, Oil & gas, Mining, Chemical & Petrochemical, Manufacturing, Agriculture, Construction, Other Applications 3) By Service: Remediation Services, Soil Remediation Services, Water Remediation Services

Engineering services can provide extensive consultation to a company needing expert advice and solutions. Engineering services firms can accept the project and work on evaluating, designing, simulating, and testing the product. The main types of engineering services are civil engineering services, environmental engineering services, construction engineering services, mechanical engineering services, and other engineering services. Civil engineering services encompass a wide range of activities, including the planning, design, and construction of commercial and residential structures; transportation infrastructure, such as roads, bridges, and railways; water distribution systems, such as dams, sewers, and sewage treatment; environmental infrastructure, such as landscaping, urban planning, and parks; industrial infrastructure construction management; construction technology; and more. The various engineering disciplines include civil, mechanical, electrical, piping, and structural engineering and are delivered through offshore and onsite models. The services are used by automotive, industrial manufacturing, healthcare sector, aerospace, telecommunications, information technology, energy & utilities, and others. The engineering services market research report is one of a series of new reports from The Business Research Company that provides engineering services market statistics, including engineering services industry global market size, regional shares, competitors with an engineering services market share, detailed engineering services market segments, market trends and opportunities, and any further data you may need to thrive in the engineering services industry. This engineering services market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenarios of the industry. The global engineering services market size will grow from $1,110.21 billion in 2022 to $1,156.5 billion in 2023 at a compound annual growth rate (CAGR) of 4.2%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The global engineering services market size is expected to grow to $1,316.06 billion in 2027 at a CAGR of 3.3%. The engineering services market is expected to benefit from steady economic growth in developed and developing countries. The International Monetary Fund (IMF) predicts that global real GDP growth will be 3.6% from 2021 to 2023. This trend will be mainly driven by regions of Asia and Africa. According to the report, Asia will represent 66% of the global middle-class population by 2030. For instance, the Indian IT-BPM industry grew by 7.7% in FY 2017, with software products and engineering services reaching US$ 25 billion. Going forward, the Asia-Pacific and Middle Eastern regions are expected to be the fastest-growing markets in the engineering services, design, animation, and graphic design industries. Developing countries such as India and China have started to attract foreign investment to improve their infrastructure. This was mainly due to an increase in internet penetration, a growth in the population, and increasing economic activity. Lack of quality control and safety concerns by engineering firms may hinder the growth of the engineering services market. Defects or failures in construction activities result in high costs. These minor defects result in re-construction to make the facility's operations impaired. Increased costs and delays are the results of ineffective internal controls and safety measures that hamper the end-to-end quality. For instance, QuEST, an engineering services company, is facing difficulties caused by a lack of understanding, problems in the execution process, and inconsistency across various business units. Companies in the industry are incurring high maintenance and budgeting costs to develop new and advanced methods to combat issues of safety and control. The increasing popularity and adoption of the Internet of Things (IoT) across the globe is the latest trend in the engineering services market. The Internet of Things (IoT) is a system of inter-related devices enabling the transmission of data over a wide range of networks. IoT enables continuous innovations in real-time data analytics, design, and development products and helps businesses grow at a faster pace. Engineering service providers are increasingly using industrial IoT to improve and optimise their production processes with better energy usage, resource allocation, and asset management. For instance, PureSoftware, an engineering service company, has successfully integrated IoT into engineering services and built a steady IoT platform to improve accuracy and speed of retrieving data. India's IoT industry is expected to reach USD 15 billion by 2020, accounting for approximately 5% of the global market. The Construction Design and Management Regulation, also known as the CDM Regulations/CDM 2015, came into force on April 6, 2015. These are the regulations governing the engineering service providers with respect to construction projects of all sizes and types. This CDM regulation (2015) replaced the Construction (Design and Management) Regulation 2007, aiming to improve the overall health, safety, and welfare of the workers and professionals involved in construction. This regulation specifies the general requirements, states safety norms, and minimum welfare facilities required at the construction sites. In 2020, Wipro, an Indian software services exporter, acquired Eximius Design for $80 million. The acquisition is expected to strengthen Wipro’s market presence in the semiconductor ecosystem. Eximius Design is a California-based engineering services company focused on ASIC design, systems, and software engineering. Eximius Design was founded in the year 2013 and has design centres in the US, India, and Malaysia. Major players in the engineering services market are Tata Consulting Services (TCS), Infosys, WorleyParsons, Deaton Engineering, Inc., Aricent Group, Cybage Software Pvt. Ltd., EPAM Systems; Inc. and GlobalLogic. North America was the largest region in the engineering services market in 2022. Western Europe was the second largest region in the global engineering services market. The regions covered in the global engineering services market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, and Africa. The countries covered in the engineering services market are Australia, Brazil, China, France, Germany, India, Indonesia, Japan, Russia, South Korea, the UK, and the USA. The engineering services market consists of revenue earned by entities that advise, prepare feasibility studies, prepare preliminary and final plans and designs, provide technical services during the construction or installation phase, and inspect and evaluate engineering projects. Engineering services’ companies apply physical laws and principles of engineering in the design, development, and utilization of machines, materials, instruments, structures, processes, and systems. Engineering services include technical application of engineering in product designing, innovations and others in industries such as building construction, mining, power and energy, transportation, manufacturing and others. The market value includes the value of related goods sold by the service provider or included within the service offering. Only goods and services traded between entities or sold to end consumers are included. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for specified geography are consumption values – that is, they are revenues generated by organizations in the specified geography within the specified market, irrespective of where they are produced. It does not include revenues from resales either further along the supply chain or as part of other products. The global engineering services market is segmented - 1) By Type: Civil Engineering Services, Environmental Engineering Services, Construction Engineering Services, Mechanical Engineering Services, Other Engineering Services 2) By End User: Automotive, Industrial Manufacturing, Healthcare Sector, Aerospace, Telecommunications, Information Technology, Energy & Utilities, Other End Users 3) By Engineering Disciplines: Civil, Mechanical, Electrical, Piping and Structural Engineering 4) By Delivery Model: Offshore, Onsite

Machinery leasing is a process of obtaining commercial-type and industrial-type machinery, vehicles, or other equipment for temporary use in exchange for periodic payments paid to the machinery owner as leasing rent. Machinery leasing helps make lower monthly payments than with a loan, benefiting from tax advantages, getting a fixed financing rate instead of a floating rate, conserving working capital and avoiding cash-devouring down payments, and gaining immediate access to the most up-to-date business tools. The main types of machinery leasing are heavy construction machinery rental, commercial air, rail, and water transportation equipment rental, mining, oil and gas, forestry machinery and equipment rental, office machinery, and equipment rental, and other commercial and industrial machinery and equipment rental. Heavy equipment rental refers to a location where huge pieces of machinery or large vehicles, typically related to construction, can be stored and retrieved for public use, and may also feature extra and related retail activities. The different modes including online, and offline involve various lease types such as closed-ended lease, option to buy the lease, sub-vented lease, and others. The machinery leasing market research report is one of a series of new reports from The Business Research Company that provides machinery leasing market statistics, including the machinery leasing industry global market size, regional shares, competitors with a machinery leasing market share, detailed machinery leasing market segments, market trends and opportunities, and any further data you may need to thrive in the machinery leasing industry. This machinery leasing market research report delivers a complete perspective of everything you need, with an in-depth analysis of the current and future scenarios of the industry. The global machinery leasing market grew from $372.83 billion in 2022 to $406.76 billion in 2023 at a compound annual growth rate (CAGR) of 9.1%. The Russia-Ukraine war disrupted the chances of global economic recovery from the COVID-19 pandemic, at least in the short term. The war between these two countries has led to economic sanctions on multiple countries, a surge in commodity prices, and supply chain disruptions, causing inflation across goods and services and affecting many markets across the globe. The machinery leasing market is expected to grow to $560.72 billion in 2027 at a CAGR of 8.4%. The emergence of start-ups as major clients of leasing service providers is expected to drive the market. Driven by cost efficiency and the necessity to acquire advanced equipment which is often high-priced, start-ups have started renting or leasing their equipment. The increasing number of start-ups is also expected to positively impact the market. For instance, according to the Department for Promotion of Industry and Internal Trade, the number of start-ups in India reached 16,000 in 2020, depicting new opportunities for the leasing market in client expansion and revenue generation. The outbreak of COVID-19 disease (COVID-19) has acted as a massive restraint on the machinery leasing market in 2020 as the need for services offered by these establishments declined due to lockdowns imposed by governments globally. COVID-19 is an infectious disease with flu-like symptoms including fever, cough, and difficulty in breathing. The virus was first identified in 2019 in Wuhan, Hubei province of the People’s Republic of China, and spread globally including Western Europe, North America, and Asia. Steps by national governments to contain the transmission have resulted in a decline in economic activity with countries entering a state of 'lockdown' and the outbreak had a negative impact on businesses throughout 2020 and into 2021. However, it is expected that the machinery leasing market will recover from the shock across the forecast period as it is a 'black swan event and not related to ongoing or fundamental weaknesses in the market or the global economy Companies are increasingly leasing 3D printing equipment for manufacturing purposes. The 3D printer is a computer-aided manufacturing device that creates three-dimensional objects by receiving digital data from a computer as input by building a three-dimensional model out of custom material. 3D printing is gaining popularity as manufacturers are becoming more familiar with industrial-grade 3D printers. Industrial-grade 3D printers are capable of printing large products with high precision and with a wide range of materials. 3D printer leasing can reduce the overall reduction of cost of the manufacturer rather than buying. For instance, Divide by Zero Technologies offers 3D printers on a lease for customers in India. Major companies in the machinery leasing market are General Electric Company, United Rentals Inc., Tokyo Century, Berkshire Hathaway Inc., Ashtead Group plc, AerCap Holdings N.V., Fuyo General Lease Co., Ltd., NetJets, Nissan Motor Co Ltd., and Air Lease Corporation. Asia-Pacific was the largest region in the machinery leasing market in 2022. North America was the second-largest region in the machinery leasing market. The regions covered in the machinery leasing market report are Asia-Pacific, Western Europe, Eastern Europe, North America, South America, Middle East, and Africa. The countries covered in the machinery leasing market are Argentina, Australia, Austria, Belgium, Brazil, Canada, Chile, China, Colombia, Czech Republic, Denmark, Egypt, Finland, France, Germany, Hong Kong, India, Indonesia, Ireland, Israel, Italy, Japan, Malaysia, Mexico, Netherlands, New Zealand, Nigeria, Norway, Peru, Philippines, Poland, Portugal, Romania, Russia, Saudi Arabia, Singapore, South Africa, South Korea, Spain, Sweden, Switzerland, Thailand, Turkey, UAE, UK, USA, Venezuela, Vietnam. The machinery rental market consists of revenues earned by entities that provide capital or investment-type equipment that clients use in their business operations. These establishments typically cater to a business clientele and do not generally operate a retail-like or storefront facility. The market value includes the value of related goods sold by the service provider or included within the service offering. Only goods and services traded between entities or sold to end consumers are included. The market value is defined as the revenues that enterprises gain from the sale of goods and/or services within the specified market and geography through sales, grants, or donations in terms of the currency (in USD, unless otherwise specified). The revenues for a specified geography are consumption values that are revenues generated by organizations in the specified geography within the market, irrespective of where they are produced. It does not include revenues from resales along the supply chain, either further along the supply chain or as part of other products. The global machinery leasing market is segmented - 1) By Type: Heavy Construction Machinery Rental, Commercial Air, Rail, and Water Transportation Equipment Rental, Mining, Oil And Gas, And Forestry Machinery And Equipment Rental, Office Machinery And Equipment Rental, Other Commercial And Industrial Machinery And Equipment Rental 2) By Mode: Online, Offline 3) By Lease Type: Closed Ended Lease, Option to Buy Lease, Sub-Vented Lease, Other Lease Types